How to foil leather with the brother scan and cut and the foil quill

*CM900 model used.

1- Place your leather onto your mat. Make sure you secure it down well onto the mat with painters tape or washi. Your leather needs to be 2.5mm or thinner.

2- On your machine click the pattern icon on the screen. (If you are using your own design you can transfer from canvas workspace or a USB.)

3- Select your design. (If you have transferred a design you will find it when you click the transfer icon.)

4- Adjust the size of your design. Click OK.

5- Select the number of copies you want to make. On this screen you can also add color fill to your design. Click set.

6- Next scan your leather into the mat. Click OK

7- Move your design over the leather scanned into the screen. Click OK.

8- Click draw. When foiling leather I use the setting of speed 2 pressure 2. Click the start icon.

9- Your design will be foiled onto the leather.